Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Manhattan Beach
Roofing work in Manhattan Beach is not the same as roofing work even ten miles inland. The marine layer, the salt, the wind coming off the Pacific, the flat roof decks on ocean-view homes: all of it changes what a roof needs to survive here. If you live in Manhattan Beach and you’re dealing with a leak, a failed flat roof, or a roof that’s simply reached the end of its life, you need a crew that knows this specific coastline. That’s what our Roofing Company team brings to every job in Manhattan Beach, from the Sand Section up into the Hill Section and over to the Tree Section. Call (213) 674-2890 and you’ll get a real person on the line, a straight answer on pricing, and a written quote before any work starts. That’s how we do it.
Why Tilehurst Roofing Los Angeles Is Manhattan Beach’s Preferred Roofing Company
Manhattan Beach homeowners tend to ask sharper questions than most. They’ve lived through enough coastal winters to know that a roof is not a commodity. They want to know what wind rating the shingle carries, whether the flashing is stainless or galvanized, and whether the crew will still be answering the phone six months after the job. We answer all of it. Greg Holloway, who leads Tilehurst Roofing Los Angeles, requires that every quote given in Manhattan Beach includes the specific components and fastening patterns this coastal zone demands. No vague language. No shrinking the scope to win the bid.
Our reputation in Manhattan Beach is built on showing up when we say we will and leaving the roof better than we found it. We carry a written guarantee on every repair, and if a repair fails inside the guarantee period, we return at no charge under the 365-Day Done Right Promise. That promise is not a sticker on a truck. It’s a document delivered before the crew leaves.
When you call about a roof issue in Manhattan Beach, we give you a response window and honor it. A live person answers every call, day or night, even weekends. That matters when a coastal storm has torn a section of flashing loose at 9 p.m. and water is coming into the bedroom. We also know the local building department’s expectations. Manhattan Beach is part of a coastal zone with specific wind and inspection requirements, and we build every quote around them, not around what’s cheapest to install. Dispatch and scheduling are coordinated from the brand’s Los Angeles office, and crews serve Manhattan Beach locally.
Styles & brands we work with






Roofing Company in Manhattan Beach: What Coastal Code Actually Requires
Manhattan Beach’s coastal zone enforces a 110 mph basic wind speed per ASCE 7-22, with Exposure D conditions requiring uplift-rated assemblies. A rating that neighboring inland cities like Torrance don’t mandate. What that means in plain terms: every roof we install here gets a nailing pattern and flashing detail engineered for salt-laden 80 mph gusts off the Pacific. A standard quote written for an inland home won’t pass inspection a block from the Strand. We write every Manhattan Beach quote to pass inspection the first time, with the documentation to prove it.
This page exists to tell you precisely what your Manhattan Beach roof must meet to satisfy local code and survive a coastal wind claim. Most roofing pages won’t mention nailing patterns, special inspections, or salt-resistant flashing grades. We will, because those are the details that decide whether your roof lasts twenty years or fails in five.
Wind-Uplift Nailing Patterns
A common failure we see in Manhattan Beach is architectural shingles nailed with a 4-nail pattern instead of the 6-nail pattern required for the 110 mph Exposure D uplift rating. The shingle itself may carry a 130 mph label, but the installation fails the inspector’s uplift check. When we write a quote for a Manhattan Beach roof, the 6-nail pattern is the floor, not an upgrade. The price you see is the price for a code-compliant install.
Special Inspections and Permits
Manhattan Beach’s hillside and oceanfront zone requires a “special inspection” of roof deck nailing before underlayment goes on. A missed inspection voids the permit and any future wind-damage claim. That is a costly mistake. Our quotes include the permit and the inspection coordination. A cheap quote that leaves it out isn’t cheaper. It’s just incomplete.
Residential Roofing in Manhattan Beach
Residential Roofing in Manhattan Beach means working with the housing stock this city actually has: large custom homes with complex roof geometries, flat roof decks serving as livable outdoor space, mixed slopes, and older beach cottages still carrying original wood shake or composition shingle. Every one of those roofs has a different set of demands. A flat deck on The Strand needs a walkable membrane with reinforced seams and stainless edge metal. A hillside home off Rosecrans needs uplift-rated shingles and proper deck nailing. A 1950s cottage in the Tree Section may need full decking replacement before new underlayment goes down. We inspect, we document, we quote a real number. Most full re-roofs in Manhattan Beach run between $14,000 and $38,000, depending on square footage, tear-off, decking repair, and material choice. Partial repairs on asphalt shingle roofs typically run $450 to $1,800. Flat-roof repairs with membrane work run higher, often $1,200 to $4,500, because the labor and materials are specific to coastal exposure.
Full Roof Replacement
A Manhattan Beach full replacement usually includes tear-off, decking inspection, replacement of any rotted sheathing, new underlayment, and the finished roof system. We don’t nail new shingles over old ones. We strip back, expose the deck, and repair what needs repairing before anything else goes down. That sequence is what lets us give a written price that holds.
Coastal Re-Roof on a Flat Roof Deck
Our crew re-roofed a custom flat-roof deck on The Strand in Manhattan Beach where the original TPO membrane had failed at every penetration. Corroded zinc flashings and marine-layer moisture had wicked under the walkable membrane. We stripped back to the decking, replaced rotted sheathing, installed ice and water shield at the parapet, set a new GAF TPO membrane with reinforced heat-welded seams and stainless steel edge metal, and finished with a walkable wear course and new scuppers sized for a 2-inch rain event. Then we walked the owner through the wind-uplift test report for their insurance file. That’s what a compliant install looks like here.
Roof Maintenance in Manhattan Beach
Roof Maintenance in Manhattan Beach is not optional. It’s the difference between a roof that lasts thirty years and one that needs replacement at fifteen. The coastal marine layer brings frequent morning fog and salt-laden air, which accelerates corrosion of metal flashings and fasteners. Strong onshore winds work at shingle edges and parapet caps. A small gap at a pipe boot becomes a leak inside a season. We recommend an annual inspection for most Manhattan Beach homes, and twice a year for anything within a block of the Strand. Basic maintenance visits, including inspection, minor sealing, and clearing scuppers and gutters, run $250 to $600. If we find failing flashing or needs that go deeper, we quote it in writing before doing the work.
Salt Corrosion Check
Every exposed metal component takes a beating here. We inspect parapet caps, pipe boots, valleys, and edge metal for zinc loss and rust. When we find galvanized flashing that’s failing near the Strand, we recommend stainless steel replacement. It costs more up front, and it lasts decades instead of five years.
Flat Deck Membrane Inspection
Flat roof decks are the most common source of leaks we find on Manhattan Beach ocean-view homes. Walkable membranes crack, heat-welded seams separate, and scuppers clog with sand and debris. Our maintenance visits include a full walk of the deck membrane, a check of all penetrations, and a flow test of the drainage. Catching a seam issue early is a $400 repair. Catching it late is a $9,000 re-roof.
Trusted Brands We Service in Manhattan Beach
We’re not tied to a single manufacturer. Material selections span seven major manufacturers, and for Manhattan Beach work, we regularly install GAF, Atlas, and Boral systems, chosen for how they handle salt, wind, and coastal moisture. GAF TPO for flat roof decks, Atlas shingles with high wind ratings for sloped sections, Boral tile where the home calls for a heavier, more traditional profile. The product fits the home, not what happens to be in the truck. We coordinate material delivery for Manhattan Beach jobs on the same schedule as the crew, so a project doesn’t stall waiting for a pallet of shingles that should have arrived Tuesday.
See the difference
Before
After
Before
After
Before
AfterCommon Roofing Company Problems We See in Manhattan Beach Homes
- Galvanized flashing corroding near the Strand. Salt spray eats through standard zinc flashing within five years, leading to leaks at parapet caps and pipe boot penetrations. A cheap quote often leaves these components out entirely or specs galvanized instead of stainless. We won’t.
- Shingles nailed with a 4-nail pattern instead of the required 6-nail pattern. The shingle label says 130 mph, but the install fails the local inspector’s uplift check. That’s a re-roof waiting to happen, not a completed job.
- Flat roof deck membranes installed without walkable wear courses. Ocean-view homes often use flat sections as decks, and a bare TPO membrane will fail under foot traffic and furniture within a few years. We include the wear course in the initial quote.
- Clogged scuppers on flat roofs backing water up under the parapet. Sand from the beach, leaves from eucalyptus trees, and marine moisture combine into a mess that blocks drainage. We inspect scupper size and flow during every maintenance visit and on every re-roof.
Pricing for Roofing Company in Manhattan Beach, CA
Here are real ranges for Manhattan Beach work, so you know what to expect before you pick up the phone. Minor asphalt shingle repairs: $450 to $1,200. Flat-roof membrane repairs with sealing and penetration work: $1,200 to $4,500. Full roof replacement on a typical Manhattan Beach home: $14,000 to $38,000, depending on tear-off, decking repair, material, and complexity. A walkable flat roof deck replacement runs higher because of the reinforced membrane, wear course, and stainless edge metal. Every quote we write for Manhattan Beach includes the 6-nail pattern, salt-resistant flashing, permit fees, and any required special inspections. If a quote looks cheaper, compare it line by line. Call (213) 674-2890 for a written estimate. It’s free, it’s specific, and it’s yours to keep.
We Also Serve Cities Near Manhattan Beach
Our crews work up and down this stretch of coast, so if you’re in Hermosa Beach, Redondo Beach, Playa Vista, or Marina del Rey, the same written-quote process applies. Coastal code details shift slightly from one city to the next, and we write every quote to the local standard. If you’re in Manhattan Beach or anywhere close by, call (213) 674-2890 and we’ll get you on the schedule.
Serving Manhattan Beach, CA - Our Local Coverage Area
We’re based in the Manhattan Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Manhattan Beach
Your Manhattan Beach roof must meet a 110 mph basic wind speed per ASCE 7-22 with Exposure D uplift requirements. Verification happens in two stages: the building department requires a special inspection of roof deck nailing before underlayment goes on, and the final inspection checks the completed fastening pattern against the approved plans. We document both, and we give you the wind-uplift test report for your records. Call (213) 674-2890 to go over your specific roof and what it needs.
Yes. Manhattan Beach’s hillside and oceanfront zone mandates a special inspection of roof deck nailing before underlayment goes on. Skipping this inspection voids the permit and any future wind-damage claim. We coordinate the inspection as part of the job. A quote that doesn’t mention it is not a code-compliant quote. Call (213) 674-2890 and we’ll explain exactly what your roofline requires.
Flat roof decks on ocean-view homes take constant salt exposure, foot traffic, and standing moisture. PVC and TPO membranes resist salt corrosion and heat degradation better than modified bitumen or bare torch-down. A compliant install includes reinforced heat-welded seams, stainless steel edge metal, ice and water shield at the parapet, and a walkable wear course. A cheap bid often omits the wear course, uses galvanized edge metal, and skips the parapet sealing. That roof fails early. Call (213) 674-2890 for a quote that includes every one of those components.
If a storm damages your roof and you file a claim, the insurer will ask for documentation of the roof’s wind-uplift rating and installation compliance. Without it, the claim can be reduced or denied. We provide a wind-uplift test report and inspection documentation with every Manhattan Beach re-roof. That paper trail is part of the job, not an add-on. Call (213) 674-2890 to talk through what your current roof has on file and what a new one should have.
Schedule a full roof inspection once a year, and twice a year if you’re within a block of the Strand. The inspection should check all metal flashings for salt corrosion, verify shingle adhesion and nailing integrity, clear scuppers and gutters, and walk any flat deck membranes for seam separation. Most annual maintenance visits in Manhattan Beach run $250 to $600. Call (213) 674-2890 to book your inspection and get a written report on what your roof needs.
Written by Greg Holloway, Owner at Tilehurst Roofing Los Angeles, serving Manhattan Beach with code-compliant coastal roofing.