Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Marina del Rey
Roofing in Marina del Rey is a salt-air problem before it’s anything else. The same roof that lasts 25 years in Culver City can show fastener corrosion and flashing failure in under a decade here, all because of the marine layer rolling off the marina every afternoon. That’s why we stock 316 stainless steel hardware and hot-dip galvanized flashing for every Marina del Rey job, and why our crews check seismic and wind-uplift anchoring as standard practice, not an upsell. If you need a Roofing Company that understands coastal roofing before the first shingle comes off, call (213) 674-2890 and we’ll put a written price in your hands before any work starts.
Why Tilehurst Roofing Los Angeles Is Marina del Rey’s Preferred Roofing Company Company
Tilehurst Roofing is part of the Kingswell family of roofing companies, founded in 2000. Led by Greg Holloway, our team works the Marina del Rey area regularly. We know the difference between a roof two blocks from the water and one up near Lincoln Boulevard, because salt exposure changes everything about what fails and when. We don’t guess at that difference. We write it into the estimate.
Marina del Rey customers tell us the same things: they’ve been burned by no-shows, price changes at the door, and repairs that peeled within months. We answer that with the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, come back if it fails. Every repair carries a written guarantee delivered before the crew leaves, and our 365-Day Done Right Promise covers the work for a full year. A live person answers every call, day or night.
Styles & brands we work with






Commercial Roofing in Marina del Rey
Commercial Roofing in Marina del Rey means flat and low-slope membranes on condominium buildings, apartment complexes, and mixed-use developments, most built between the 1960s and 1980s with built-up roofing or modified bitumen. These roofs take a beating from salt spray and winter storm winds off the marina, and the failure points are almost always at the edges: parapet flashing, drip edge, rooftop equipment curbs. Most commercial roofing jobs in Marina del Rey run $8 to $14 per square foot for a full tear-off and replacement with a GAF or CertainTeed modified bitumen system. Repairs, like seam patches or flashing replacement, typically run $900 to $2,400 depending on how many penetrations have corroded.
Flat Roof Membranes for Condo and Apartment Buildings
Built-up and modified bitumen roofs dominate Marina del Rey’s multifamily stock, and they’re the right product here when installed to coastal spec. The problem is rarely the membrane itself. It’s what holds the membrane down. We specify hot-dip galvanized drip edge and 316 stainless fasteners on every edge and penetration, because standard electro-galvanized hardware rusts through in five to ten years this close to the water.
Wind-Uplift Anchoring and Seismic Straps
Marina del Rey building codes require wind-uplift anchoring and seismic straps on rooftop equipment. Inland crews miss this constantly. We don’t. Every commercial roof we install or repair gets checked for uplift resistance at the corners and edges, where storm gusts off the marina hit hardest. If the straps are missing, we add them before the new membrane goes down.
Metal Roof Installation in Marina del Rey
Metal Roof Installation in Marina del Rey is a strong choice for homeowners who want to stop fighting the salt air, but only if the metal and hardware are specified for marine exposure. A painted Galvalume or aluminum standing-seam panel can last 40 years here, while the wrong fastener rots out in six. Metal roof installation in Marina del Rey typically runs $14 to $22 per square foot for a standing-seam system on a single-family home, including tear-off of the old roof. That’s higher than inland, and the hardware is why.
Marine-Grade Fasteners and Clips
We use 316 stainless steel clips and fasteners on every metal roof in Marina del Rey, full stop. Not electro-galvanized, not zinc-plated. Those are inland products. Salt spray eats the zinc coating within a few years, and then the fastener itself goes, loosening panels and opening the roof to leaks. The stainless spec adds about 15 to 20 percent to the hardware line item, but it’s the difference between a 40-year roof and a 10-year repair cycle.
Standing-Seam Panels for Coastal Winds
Standing-seam panels interlock along raised ribs, which gives them excellent resistance to the onshore winds that hit Marina del Rey during winter storms. We also specify a high-temperature ice-and-water underlayment under the panels, which handles the condensation that the marine layer leaves on metal surfaces. Homeowners near the water get the biggest benefit here, especially on re-roofs of older single-family homes with modest slopes.
Trusted Brands We Service in Marina del Rey
We install and repair roofing systems from seven major manufacturers, so you’re not stuck with whatever happens to be on the truck. For Marina del Rey homes, we stock and specify coastal-appropriate lines from GAF, CertainTeed, and Owens Corning most often. GAF’s modified bitumen cap sheets are a workhorse on low-slope condo roofs here. CertainTeed’s shingle lines hold up well on the older single-family homes in the area with composition shingles. Owens Corning’s underlayment products give us an extra layer against the persistent marine moisture. Because we keep local stock for Marina del Rey jobs, turnaround on repairs is faster, and we’re not waiting on a parts order from a warehouse inland.
See the difference
Before
After
Before
After
Before
AfterCommon Roofing Company Problems We See in Marina del Rey Homes
- Rusted electro-galvanized fasteners on roof decking and flashing. This is the number one coastal failure we find. The zinc coating fails in five to ten years under salt spray, and then water follows the rust into the decking.
- Pinhole corrosion on parapet flashing and vents. On condo buildings with low-slope roofs, the flashing at the parapet wall often shows pinholes before the membrane itself shows wear. The fix is hot-dip galvanized or stainless replacement flashing, not another coat of mastic.
- Blow-offs from inadequate wind-uplift anchoring. Winter storms off the marina can peel a poorly anchored membrane at the corners and edges. Many out-of-town crews don’t check uplift ratings because inland codes don’t demand it.
- Missing or skipped seismic straps on rooftop equipment. Marina del Rey code requires them, and a surprising number of roofs we inspect don’t have them. It’s not a leak today, but it’s a code violation the next time the building gets inspected or sold.
Pricing for Roofing Company in Marina del Rey, CA
Here’s what honest numbers look like in Marina del Rey. A standard asphalt-shingle repair on a single-family home ranges from $600 to $1,800, depending on how much flashing or decking has to be replaced. Full roof replacement on a composition shingle home typically runs $7 to $11 per square foot. Commercial flat roof replacement runs $8 to $14 per square foot. Metal standing-seam installation runs $14 to $22 per square foot. Coastal-spec hardware accounts for a real part of these numbers, typically 10 to 20 percent over an inland-spec job, because stainless steel and hot-dip galvanized parts simply cost more than standard electro-galvanized. The cheap spec always looks better on paper. Ten years in, it’s leaking.
We give every Marina del Rey customer a written price before any work begins. It doesn’t change at the door. Call (213) 674-2890 for a free estimate, and we’ll walk you through the numbers in plain English.
We Also Serve Cities Near Marina del Rey
Our crews work throughout the coastal and near-coastal neighborhoods of Marina del Rey and the surrounding cities. You’ll find us on roofs in Playa Vista, Culver City, Santa Monica, and Manhattan Beach, where we carry the same coastal-spec standards and the same written-price guarantee to every job.
Serving Marina del Rey, CA - Our Local Coverage Area
We’re based in the Marina del Rey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Marina del Rey
Salt spray from the marina and the persistent marine layer accelerates corrosion on standard galvanized steel, eating through the zinc coating in as little as five to ten years. The same flashing in Culver City or inland Los Angeles often lasts two or three decades. We specify hot-dip galvanized or 316 stainless steel on every exposed metal surface for Marina del Rey roofing work, which closes the gap. If your flashing is showing rust streaks or pinholes, call (213) 674-2890 for a free inspection and a written repair quote.
Modified bitumen, specifically a two-ply system with a granulated cap sheet from GAF or CertainTeed, is the best fit for most flat and low-slope condo roofs in Marina del Rey. It handles the salt air well when the edge metal and fasteners are upgraded to coastal spec, and it stands up to the wind gusts that come off the marina during winter storms. We also recommend checking wind-uplift anchoring at the corners and edges before the new membrane goes on. For an exact number on your building, call (213) 674-2890 and we’ll put a written quote together.
Coastal salt air attacks the fasteners and clips first, not the panels. A standing-seam metal roof in Marina del Rey needs 316 stainless steel fasteners and clips, along with an aluminum or marine-grade coated panel. Using standard zinc-plated hardware saves a little money up front and causes loose panels and leaks within a decade. We price the marine-grade hardware into every metal roof estimate we write for Marina del Rey, so there’s no surprise downgrade later.
Yes, and the difference is mostly in hardware and sealant. A property directly on the marina gets the full salt-spray load, so we specify stainless fasteners, hot-dip galvanized flashing, and marine-grade sealant on every penetration. A few blocks inland, the exposure drops enough that a standard upgraded spec may be sufficient, though we’d still avoid plain electro-galvanized fasteners within a half mile of the water. Both estimates come from us as a written price before any work starts. Call (213) 674-2890 and tell us your address, and we’ll quote the right spec for your exact location.
Marina del Rey roofs should meet at least the wind-uplift requirements in the California Building Code for the coastal zone, which generally means a design wind speed around 110 to 120 mph depending on the exact site and building height. For low-slope membrane roofs, that translates to additional fastening at the corners and perimeters, where uplift forces are highest. We check this on every roof we do in Marina del Rey, and we document that the anchoring is in place before we close the job out.
If you’re dealing with a rust-streaked flashing, a flat roof that’s nearing the end of its life, or an estimate from another contractor that doesn’t mention uplift anchoring at all, call (213) 674-2890. We’ll come out, look at the roof, and give you a written price for exactly what it needs. Nothing vague, nothing changed at the door.
Written by Greg Holloway, Owner at Tilehurst Roofing Los Angeles, serving Marina del Rey through the Kingswell family of roofing companies.