Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gutter Installation Cost in Los Angeles?
Gutter installation in Los Angeles typically costs between $1,600 and $4,200 for a standard single-family home, with most homeowners paying around $2,800 for roughly 150 to 200 linear feet of new seamless aluminum gutters. The price depends on the gutter material, the home’s roofline complexity, and whether you’re replacing existing gutters or starting from scratch. For a fast, exact number on your specific house, call Tilehurst Roofing Los Angeles at (213) 674-2890 for a free, written estimate.
That range reflects what we see across Los Angeles neighborhoods from Eagle Rock to Sherman Oaks to Westchester. A smaller single-story bungalow in Highland Park might run $1,400 to $1,900 total. A larger two-story home in Brentwood or the hills above Studio City with 250-plus linear feet and multiple corners can push past $5,000, especially if you choose copper or zinc. We’ll get into the exact numbers below so you know what to expect before you pick up the phone.
Key Takeaways: Gutter Installation Cost in Los Angeles
- Average total cost: $1,600 – $4,200 for a typical LA home.
- Per-linear-foot pricing: $8 – $22 for aluminum (the most common choice), $18 – $40 for copper, $12 – $28 for steel.
- Labor typically makes up 25 – 35% of the total; the rest is material, fasteners, and disposal.
- Replacing old gutters costs more than new installation because of removal and disposal fees.
- Tilehurst Roofing Los Angeles provides a written price before any work starts. No surprises at the door.
Gutter Installation Cost Breakdown (2026)
Here’s a line-by-line breakdown of what you’re paying for when a gutter crew shows up in Los Angeles in 2026. These are real market numbers based on current material and labor prices in the LA basin.
| Line Item | Typical Cost Range | What It Covers |
|---|---|---|
| Seamless aluminum gutters (5-inch K-style) | $8 – $14 per linear foot | Material fabricated on-site to match your roofline exactly |
| Seamless aluminum gutters (6-inch) | $10 – $16 per linear foot | Larger capacity for LA homes with steep tile roofs or heavy rain exposure |
| Downspouts | $8 – $15 per linear foot | Vertical runs that carry water to the ground or drainage system |
| Copper gutters | $18 – $40 per linear foot | Premium material, popular in Spanish-style and high-end LA renovations |
| Galvanized steel gutters | $12 – $28 per linear foot | Heavier-duty option, less common in coastal LA due to salt air |
| Old gutter removal and disposal | $150 – $450 total | Tear-off of existing gutters and haul-away |
| Fascia board repair | $8 – $20 per linear foot | Replacing rotted wood behind the old gutters before new install |
| Gutter guards / leaf protection | $6 – $15 per linear foot | Mesh or screen covers; more relevant if you have overhanging trees |
| Permits (if required by your LA neighborhood) | $50 – $250 | Most residential gutter replacements don’t need a permit in LA, but hillside properties or historic districts sometimes do |
Those figures assume a relatively straightforward roofline. In neighborhoods like Mount Washington or the hills of Silver Lake, where homes are built on sloped lots with multiple roof angles, we regularly see costs run 15 – 25% higher because the crew needs more time with ladders, scaffolding, and custom angle cutting. A flat single-story ranch in the Valley is the other end of the spectrum – simple, fast, and priced at the lower end of the range.
What moves your price up or down most? Three things: linear footage, material choice, and the condition of the fascia board behind your existing gutters. If that wood is rotted – and we see this often in older LA homes built in the 1920s through 1950s – you’ll pay $8 – $20 per linear foot to replace it before new gutters can go up. Skipping that step means your new gutters sag within a year. We won’t do that to you.
What Affects Gutter Installation Pricing in Los Angeles
Los Angeles has a building stock and climate that make gutter pricing different from other markets. Here’s what actually moves the number on your estimate.
- Roofline length and corners. Every inside and outside corner requires a custom miter cut and a sealed seam. A home with a simple rectangular footprint in Culver City has four corners. A Spanish-style home in Hancock Park with courtyards and inset balconies can have 14 or more. Each corner adds $25 – $60 in labor and material.
- Roof material and slope. Tile roofs – common throughout Los Angeles from Mar Vista to Los Feliz – make gutter installation slower. Crews have to work carefully around tile overhangs, and sometimes the tiles need to be lifted or trimmed slightly to get the gutter pitch right. This adds $2 – $4 per linear foot compared to a composition shingle roof.
- Fascia board condition. LA’s winter rain cycle plus summer dry heat rots fascia boards on older homes. If yours are soft, replacement is mandatory, not optional. The cost range above reflects what we see in neighborhoods like West Adams and Jefferson Park.
- Home height and foundation slope. A two-story home in Silver Lake with a downslope lot needs taller ladders, safety anchoring, and more setup time. Labor costs run 20 – 30% higher on two-story homes versus single-story.
- Material selection. Aluminum is the default for about 85% of LA gutter installs. Copper shows up on high-end restorations in neighborhoods like San Marino and Pasadena-adjacent areas, and it runs double to triple the cost of aluminum. Steel is rare because of salt-air corrosion near the coast, but some homeowners in the Palisades and Malibu choose it for impact resistance.
- Gutter size and capacity. Standard 5-inch gutters handle most LA rain events fine. But if your roof has a large surface area or steep pitch – common in the hills – 6-inch gutters are worth the upgrade. They cost about $2 – $3 more per foot and dramatically reduce overflow during the heavy atmospheric river storms we’ve seen in recent winters.
For context on what goes into a quality gutter system and why corners, pitch, and hanger spacing matter more than most homeowners expect, see our Gutter Installation in Los Angeles page. We walk through the whole process, from measurement to final cleanup.
How to Save on Gutter Installation
Nobody wants to overpay for gutters. Here’s how to keep your gutter installation budget tight without cutting corners that’ll cost you later. These are the same recommendations Greg Holloway gives when homeowners call asking how to trim a quote.
- Replace gutters in the off-season. Gutter demand in LA spikes in October and November, right before the rainy season. If you can schedule between February and August, you’ll often get more scheduling flexibility, and crews aren’t rushing between storms. That can translate to a slightly better price.
- Bundle gutter work with roof work. If you’re already getting a roof replacement from Tilehurst Roofing, adding gutters at the same time saves on mobilization costs and fascia repair coordination. We can do both in one visit, which saves you money on setup and tear-off logistics.
- Fix fascia boards now, not later. Replacing rotted fascia before gutters go up is cheaper than doing it after the fact. Once gutters are installed, fascia repair means removing the gutters again. Do it once, do it right.
- Choose the right gutter size for your roof. Don’t overbuy 6-inch gutters on a small single-story house with a modest roof area. But don’t underbuy on a large tile roof that dumps water fast. The right size prevents overflow damage and future repair calls.
- Ask for a written estimate and compare itemized line items. Not just a total. Itemized quotes show you exactly where money goes. We give every homeowner a written line-item price before any work starts. If a contractor won’t do that, walk away.
One thing you should never do to save money: skip gutter hangers. Some low-bid crews will install gutters with only a handful of hangers spaced 4 – 6 feet apart, which works for about a year before the gutters start sagging and holding standing water. We space hangers every 18 – 24 inches, and that’s a standard we put in writing. A gutter system that fails inside a year isn’t a bargain.
If you want a specific number for your house, call us at (213) 674-2890. Tilehurst Roofing Los Angeles gives free estimates with a written price before any work starts. That’s the home standard we hold to on every single job.
FAQs – Gutter Installation Cost
How much does gutter installation cost per foot in Los Angeles?
Seamless aluminum gutters run $8 – $14 per linear foot for standard 5-inch K-style, and $10 – $16 per foot for 6-inch. Copper runs $18 – $40 per foot. These are installed prices including labor and fasteners. Call (213) 674-2890 for an exact quote on your roofline.
Is it cheaper to install gutters myself?
Sectional aluminum gutters from a hardware store run $3 – $7 per foot in materials, which looks cheaper up front. But sectional gutters have seams every 10 feet – and every seam is a future leak. Installing gutters yourself also means doing your own ladder work on a roof edge, which we don’t recommend. For a professional seamless system with a written guarantee, the cost difference is far smaller than the cost of repairing water damage from a failed DIY gutter system.
How much does it cost to replace old gutters in Los Angeles?
Replacing existing gutters costs $150 – $450 more than new installation because of removal and disposal. Total replacement for a typical LA home runs $1,800 – $4,500. If your fascia boards underneath are rotted, add $8 – $20 per linear foot for replacement. Call (213) 674-2890 for a written estimate that includes everything.
Do I need permits to install gutters in Los Angeles?
Most residential gutter installations in Los Angeles don’t require a permit if you’re replacing existing gutters in the same location. The exceptions are historic districts and properties with protected architectural status, where a permit might run $50 – $250. We’ll check your specific property and tell you before any work starts. No guesswork, no surprise fees.
How long does gutter installation take?
A typical single-family home takes 4 – 8 hours, including removal of old gutters and cleanup. Larger homes with complex rooflines can take two days. We answer every call with a live person, so if you call to check schedule availability, you’ll get a straight answer about the next opening. No voicemail roulette.
What’s included in a gutter installation estimate?
A proper estimate includes material cost per linear foot, labor, downspouts, fasteners, corner miters, sealant, cleanup, and haul-away. If fascia repair is needed, that’s listed separately. At Tilehurst Roofing Los Angeles, your written estimate is the price. Not a starting point for negotiation. Call (213) 674-2890 and we’ll put the number in your hands.
Why Homeowners Choose Tilehurst Roofing for Gutter Installation
We’re a Kingswell family roofing company, founded in 2000, and we built Tilehurst for homeowners in Los Angeles who’ve already been let down once. Maybe a contractor no-showed. Maybe the price changed at the door. Maybe a repair failed within a month. We operate differently, and it’s not just a slogan. It’s the way Greg Holloway runs every job.
Here’s what you get when you call us:
- Written Price Before Any Work Starts. You’ll have a line-item estimate in your hands before any crew member touches your roof. Never negotiated away, never adjusted at the door.
- Written Guarantee on Every Repair. Your guarantee is delivered before the crew leaves. Not mailed later, not promised verbally. In writing.
- 365-Day Done Right Promise. If something isn’t right within a full year of your gutter installation, we make it right. Documented accountability, not a vague promise.
- Free Second Visit if the Repair Fails. If a gutter issue comes back inside the guarantee period, we return at no charge. Period.
- A live person answers 24/7. Evenings, weekends, early mornings. You call, a person picks up. No callback queue, no voicemail tag.
- Material choice from seven manufacturers. GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. We stock and source across all seven so the material fits your home, not whatever happens to be in the truck.
The Kingswell Way is simple: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That’s what we do on every gutter installation, every roof repair, every replacement.
Get Your Free Gutter Installation Estimate in Los Angeles
If you’re ready to know exactly what new gutters will cost for your home, call Tilehurst Roofing Los Angeles at (213) 674-2890. We’ll give you a free, written estimate with clear line items and no pressure. You’ll know the price before any work starts, and every guarantee is in writing before a single nail is driven.
Whether you’re in Eagle Rock, West Adams, Sherman Oaks, or anywhere else in the Los Angeles basin, we’ll answer your call with a live person and give you a straight answer. That’s how we do business.
Pricing reflects the Los Angeles market as of 2026. Tilehurst Roofing Los Angeles offers free estimates – call (213) 674-2890.
Written by Greg Holloway, Owner at Tilehurst Roofing Los Angeles, serving Los Angeles since 2000 through the Kingswell family of roofing companies.
What Our Customers Say
"The estimator climbed up, took photos, and showed me the actual problem areas instead of just talking. No pressure to replace anything that didn't need it. Repair's held up great."
- Tom Easley"Full replacement after the last hail storm. They wrote up everything, worked with my insurance, and the crew cleaned the yard so well I couldn't find a single nail. Done in two days like they said."
- Lauren Petrakis"Small leak around the chimney flashing. They sealed it properly and it's held through a wet winter. Didn't push me toward a whole roof like the last outfit tried to."
- Bernard Oakes