A Tilehurst company - serving Los Angeles, CA

Owens Corning Roof Replacement Nationwide

Tile roofingTile roofing
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Roof Replacement in Los Angeles: What to Know First

Owens Corning roof replacement in Los Angeles typically runs $14,500 to $28,000 for a full tear-off and re-shingle on a standard 1,800 to 2,400 square foot home, depending on which shingle line you choose and what the decking looks like once we pull the old roof. Most jobs take three to five working days from tear-off to final inspection. We’re an independent Owens Corning service provider, which means we install their products, we know their failure patterns, but we don’t answer to their corporate office. We answer to you, and we put the price in writing before any work starts. If you’re weighing repair against replacement, or you’ve got a second estimate that doesn’t match the first one, call (213) 674-2890 and we’ll give you the straight answer.

Call (213) 674-2890

How Owens Corning Products Fail – and How We Fix Them

  • Duration Series granule loss and premature balding. The Duration line carries a lot of weight in LA because the SureNail strip holds up to the Santa Ana gusts, but we see granule shedding faster than expected on homes within a few blocks of the 405 and the 10, where constant exhaust and brake dust sit on the roof. The granules don’t just wear off from rain; airborne grit grinds them down over a decade. When we tear off a Duration roof that’s gone smooth in patches, the fix is full replacement with a fresh Duration or Duration Flex install, plus a conversation about future wash-downs to slow the same wear.
  • TruDefinition Duration color fading on south-facing slopes. Owens Corning bakes their color into the mat, but no shingle fully escapes a hillside in Studio City or Sherman Oaks that takes direct sun from noon to six. We see Duration designer colors, especially the deeper browns and blues, lighten unevenly after eight to twelve years. The shingle still sheds water fine, but the homeowner is looking at a patchy roof. Replacement is the only real fix when fading becomes the complaint. We help clients pick a lighter or cool-roof rated color if they want longer visual life on the second roof.
  • Oakridge nail-strip overdriving. The Oakridge series is Owens Corning’s workhorse, and it’s a decent shingle, but we regularly pull Oakridge roofs where the previous installer buried the nails through the strip. Overdriven nails weaken the seal and let the shingle lift in wind. Once they’re compromised, you can’t re-nail them back to original holding strength. The fix on an Oakridge roof with widespread lifting is a tear-off and proper reinstall with correct nailing pressure and pattern. This is one of the most common second-opinion calls we get in Los Angeles.
  • Supreme asphalt shingle seal failure on shallow-pitch roofs. The Supreme line shows up on a lot of older LA bungalows with slopes right at the 2:12 minimum for asphalt. On a shallow roof, water moves slowly, and if the seal strip lets go, moisture works sideways into the lap joints. We see this on homes in West Adams and Leimert Park where original 1950s roofs were redone in Supreme during a mid-2000s renovation. By the time we’re called, there’s staining at the eaves and the shingles are brittle. Full replacement, often with a reinforcement of the underlayment, is the answer.
  • VentSure intake failure and attic heat damage. Owens Corning’s VentSure ridge and intake vents work well when paired correctly, but a roof is only as good as its ventilation. We see Owens Corning shingle roofs in Los Angeles with premature curling and cracking that trace back to a choked soffit or a ridge vent cut too narrow. The shingle wasn’t the problem; the heat trapped under the decking cooked it from below. When we replace, we check the vent math first and won’t lay a new Owens Corning roof over a ventilation system that’s going to kill it in ten years.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Owens Corning Roof Replacement Process

  1. 1
    We come out and look at the roof without charging you for the diagnostic. We check the shingle condition, the decking from the attic side where possible, the flashing at chimneys and valleys, and the vent run. We also ask how long you’ve been in the house and whether you know the roof’s age. That tells us a lot.
  2. 2
    We write the price. Not a ballpark. A fixed, line-item price for the tear-off, the decking replacement footage we anticipate, the underlayment, the Owens Corning shingle line you pick, the edge metal, the ridge cap, and the haul-away. You get it in writing before anything starts. If we find decking rot under the old roof, we price the extra wood per sheet in that same document so you know the rate, not just a surprise total.
  3. 3
    We tear off and inspect the decking. Old shingles come off, and we look at the plywood or plank underneath. In Los Angeles we see a lot of delamination on older plywood from decades of heat and the occasional wet winter. Rotted or delaminated sections get replaced before the new roof goes down.
  4. 4
    We install the new Owens Corning roofing system. Underlayment to code, leak barrier at the eaves and valleys, drip edge, starter strip, the shingles with correct nail placement, ridge cap, and flashing re-bedded where needed. We install to Owens Corning’s published specs because that’s what protects the warranty.
  5. 5
    We test and detail. We inspect every slope, check the nailing pattern, confirm the ridge vent is drawing air, and run a magnet sweep for stray nails from the gutters, walkways, and planting beds around the house.
  6. 6
    We put the guarantee in writing and hand it to you before the crew leaves. If something isn’t right inside the 365-Day Done Right Promise window, we come back and fix it at no charge. No mailed warranty book weeks later; you have it the day we finish.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Owens Corning Roof Replacement Costs in Los Angeles

Here’s what we quote in the field, based on the Owens Corning line and the condition of what we’re tearing off.

Scope Typical Cost
Full tear-off and replacement, Owens Corning Oakridge, standard 1,800 sq ft home $14,500 – $18,000
Full tear-off and replacement, Owens Corning Duration, standard 2,000 sq ft home $17,000 – $22,500
Full tear-off and replacement, Duration Design or Cool shingles, 2,200 – 2,600 sq ft home $21,000 – $28,000
Decking replacement, per 4×8 sheet, if rot or delamination is found $95 – $135 per sheet
Fascia, drip edge, or flashing replacement at valleys and chimneys $1,200 – $3,800 added, depending on scope

The price moves on three things: the size and pitch of the roof, the shingle line you choose, and what’s hiding under the old roof. If you want a real number, not a range, call (213) 674-2890 and we’ll put eyes on your roof and a written price in your hand. The estimate is free.

Why Los Angeles Homeowners Call Tilehurst Roofing Los Angeles for Owens Corning Work

We’re owned and operated under the Kingswell family of roofing companies, which has been doing residential roofs since 2000, but the reason people call us isn’t the founding date. It’s that we show up in the window we said we would, and we don’t change the price at the door. Greg Holloway, our owner, learned the trade at Los Angeles Trade-Technical College and has spent over a decade on roofs across this county, from torch-down flat roofs in Mid-City to clay tile on Eagle Rock hillsides. A live person answers our phones 24 hours a day, and that’s not a call center; it’s someone who knows roofing calls. We stock and install Owens Corning as one of seven major lines we carry, including GAF and CertainTeed, because the right shingle for a Westside craftsman isn’t automatically the right shingle for a Tarzana ranch. We set up the crew, write the price, put the guarantee in writing, and back it with the 365-Day Done Right Promise. If a repair fails inside the guarantee period, we come back at no charge.

FAQs

Need Roofing help in Los Angeles? Licensed & insured · Free on-site estimates response · free estimates
Call (213) 674-2890
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Tilehurst Roofing Los Angeles responds fast. No obligation.

When you submit this form, you acknowledge our Privacy Policy and consent to being contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch