Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roofing Company in Los Angeles: What to Know First
Boral roofing company in Los Angeles means finding a contractor who actually knows how Boral concrete and clay tile behaves on Southern California homes. We’re an independent Boral service provider, not a manufacturer-authorized shop, which means we fix what’s failing without pushing a brand agenda. Most Boral repairs run between $450 and $2,800 depending on what’s failed, and we give you a written price before we touch the roof. This page is for Los Angeles homeowners who already own a Boral roof and need straight answers about repair, replacement, and what it costs. Call (213) 674-2890 and you’ll get a live person, any hour.
How Boral Products Fail – and How We Fix Them
Boral makes good tile. But every roof system has weak points, and we see the same ones repeat across Los Angeles neighborhoods. Here’s what actually goes wrong:
- Cracked or displaced Boral concrete tile from foot traffic. The Boral Villa and Barcelona profiles are common on Los Angeles homes, and their concrete tiles crack when someone walks the roof incorrectly. The fix is matching the tile profile and color, then resetting or replacing the broken piece. We walk the load-bearing points only, and we bring sample tiles to confirm the match before we order.
- Failed underlayment beneath Boral tile – not the tile itself. This is the big one. Boral tile can last 50 years, but the underlayment underneath typically fails in 20 to 25 years, especially on Los Angeles roofs that bake in direct sun. You’ll see leaks with no visible broken tile. The real fix is lifting the tile, replacing the underlayment, and resetting the same tile. That’s a bigger job than a patch, and it’s the one we explain carefully because the honest answer is not always the cheapest one.
- Boral tile slippage at the eave line after seismic activity. Los Angeles sits in earthquake country, and we see Boral tile shift at the eaves after smaller quakes that don’t damage the rest of the house. The tile doesn’t break; it just moves out of place and exposes the decking. We reset the tile, check the fastening pattern, and add clips where the original install skipped them.
- Broken ridge caps on Boral concrete tile roofs. The ridge cap pieces are the most exposed part of the roof, and on Boral roofs they take the full brunt of Santa Ana winds and afternoon sun. Cracks propagate along the cap line, and water gets in at the peak. We replace the cap pieces and re-bed them in mortar or flexible sealant depending on the existing setup.
- Boral tile color fading and efflorescence. Concrete tile naturally effloresces over time, leaving white mineral streaks. It’s cosmetic, not structural, but Los Angeles homeowners often call us thinking the roof is failing. We’ll tell you honestly whether it’s just the tile’s patina or something that actually needs work. If it’s cosmetic, we say so and don’t sell you a job you don’t need.
Styles & brands we work with
Our Boral Roofing Company Process
- 1
You call (213) 674-2890. A live person answers. You describe what you’re seeing, and we schedule a visit in a window we actually keep.
- 2
We walk the roof and diagnose. Greg Holloway or one of our uniformed techs gets on the roof, checks the Boral tile, the underlayment, the flashing, and the ridgelines. We photograph everything and show you what we found.
- 3
We give you a written price before any work starts. Not a ballpark. Not a range we’ll tighten later. A line-item price you can hold us to. If repair doesn’t make sense, we tell you replacement math instead.
- 4
We do the work with the right parts. For Boral tile, we match the existing profile and color from the nearest supply house, and we use OEM Boral tile when it’s available and the lead time works. When it’s not, we use a quality aftermarket tile that matches, and we tell you which is going on your roof before we order it.
- 5
We test and clean up. After the repair, we run water on the repaired area, check the interior for signs of moisture, and leave your yard cleaner than we found it. Every repair comes with a written guarantee, handed to you before we leave.
- 6
You keep the paper. If that repair fails inside the guarantee period, we come back and correct it at no charge under the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roofing Company Costs in Los Angeles
Here are the numbers we quote most often for Boral work in Los Angeles:
| Job | Typical Range |
|---|---|
| Replace 1-5 cracked Boral concrete tiles | $450 – $900 |
| Reset slipped eave tiles (up to 20 linear feet) | $600 – $1,400 |
| Replace broken Boral ridge caps (up to 12 pieces) | $800 – $1,800 |
| Underlayment replacement under Boral tile (per 10×10 section) | $1,200 – $2,400 |
| Boral tile repair plus new flashing at chimney or valley | $900 – $2,800 |
What moves the price: roof pitch, tile profile availability, whether the underlayment is still doing its job, and whether the existing install used clips or just mortar. The estimate is free, and the price we quote is the price you pay. Call (213) 674-2890 and we’ll get you real numbers for your roof.
Why Los Angeles Homeowners Call Tilehurst Roofing Los Angeles for Boral Work
We’re part of the Kingswell family of roofing companies, founded in 2000, and we operate by a set of rules we call The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, come back if it fails. That 365-Day Done Right Promise covers every job we do, including Boral tile repairs. Every tech on your roof is background-checked and in uniform, so you know exactly who’s up there. And since we install roofs from seven manufacturers including GAF, Owens Corning, and CertainTeed, we’re not trying to sell you one brand. If your Boral roof needs a repair, we fix it. If it needs a full replacement and Boral doesn’t fit your budget, we show you what does.
FAQs
In most cases, yes. We source from Los Angeles-area supply houses that stock current Boral profiles like Villa, Barcelona, and Verona, and we bring physical samples to your home to confirm the match before ordering. If the tile was discontinued, we’ll show you the closest available match and get your sign-off before any work begins. Call (213) 674-2890 and we’ll check availability for your specific profile.
Boral tile warranties typically cover the tile itself, not the installation or the repair work, so a properly executed repair by a licensed contractor should not void the tile warranty. We’re an independent Boral service provider, so we won’t claim to represent the manufacturer. If you have warranty questions specific to your roof, we’ll walk you through what your paperwork says and suggest calling Boral directly for confirmation.
Most Boral tile repairs – cracked tile replacement, ridge cap work, eave resets – are finished in one visit, usually four to six hours. Underlayment replacement under Boral tile is a larger job, typically two to three days depending on roof size and weather. We’ll give you a specific timeline before work starts, and we show up in the window we promised.
If the tile itself is in good shape but the underlayment is failing, repair often makes sense: we lift the tile, replace the underlayment, and reset the same tile. If the tile is cracked across large sections or you’re chasing leaks in multiple places, replacement may be the better long-term math. We’ll show you both numbers and let you decide. The estimate is free.
Written by Greg Holloway, Owner, Tilehurst Roofing Los Angeles at Tilehurst Roofing Los Angeles, serving Los Angeles and nearby areas.