Tamko Gutter Replacement Nationwide

Tamko Gutter Replacement: The Los Angeles Owner’s Guide

If you’re looking for Tamko gutter replacement in Los Angeles, here’s the straight answer: we carry Tamko-compatible gutter systems on our trucks, and most full gutter replacements on a typical LA single-family home run between $1,850 and $4,200 installed, depending on linear footage and whether we’re also replacing downspouts and hangers. That price includes tear-off of the old system, new run, brackets, sealant, and a written guarantee on the labor before we leave. Most owners discover they need this work after a winter rainstorm: water pouring over the gutter lip instead of through the downspout, a section pulling away from the fascia, or rust blooms at the seams that finally gave way.

Call (213) 674-2890

Tamko doesn’t manufacture gutters under its own brand the way it makes shingles. What most Los Angeles homeowners actually have is a Tamko roof system matched with a gutter run that was installed at the same time, often aluminum or galvalume, and now that run has failed. We treat the gutter replacement as part of the larger waterproofing envelope, because on a Tamko roof in LA, the gutters are doing more work than most people realize. Our team stocks Tamko-compatible gutter profiles and can match the existing color and style rather than forcing you into whatever happens to be on the shelf.

Key Takeaways

• Tamko gutter replacement in Los Angeles typically runs $1,850 to $4,200 installed, with written pricing before work starts.
• We stock Tamko-compatible aluminum gutter profiles on the truck for same-visit replacement in most cases.
• Your failure is usually at the seams, hangers, or downspout connections, not the gutter run itself.
• We’re an independent local installer, not affiliated with Tamko, but we match their roof systems daily.

Which Tamko Models This Applies To

Tamko’s roofing lineup spans three main families: Heritage shingles (their architectural asphalt line), Titan XT (their heavier impact-resistant shingle), and their metal roofing systems. The gutter work we do applies to all of them, because the gutter itself is a separate component that gets installed along the eave line regardless of what’s on the roof deck. That said, there’s a compatibility gotcha we see all the time in Los Angeles: homes with Tamko metal roofing often have a specific drip edge profile that’s wider than standard, and the gutter needs to be hung slightly lower to catch water properly. If your previous installer tucked the gutter too tight to that profile, water sheds behind the run and rots the fascia board.

When you call us about Tamko gutter replacement, we’ll ask you to check two things: the color code stamped on the inside of the gutter (usually a two-letter code like WE for weathered wood or BR for brown), and the width across the top opening, which is typically 5″ for residential LA homes but sometimes 6″ on larger rooflines. We carry both widths in K-style aluminum, which is what 90% of Los Angeles homes have. For the OEM versus aftermarket decision: Tamko doesn’t sell gutters directly, so there’s no OEM gutter to buy. What matters is that the replacement matches the profile and gauge of what’s already on the house. We stock .032-gauge aluminum as our standard, and we’ll tell you plainly if your existing run was .027, because that thinner gauge is exactly why it failed in the first place.

Signs Your Tamko Gutter Replacement Is Failing

• Water sheeting over the front lip during rain. This almost always means the run is pitched wrong or clogged at the downspout connection. In LA’s dry summers, sediment and roof granules build up, and the first winter storm exposes the blockage. A full replacement fixes the pitch and gives us a chance to add larger downspout openings.
• Gutter pulling away from the fascia with visible screw holes. The hangers were either spaced too far apart or nailed into rotted wood. Los Angeles gets enough morning marine layer moisture that fascia rot is common, especially on the west-facing sides of homes in Santa Monica, Culver City, and Palms where the fog sits longer.
• Rust blooms or pinhole leaks at the seams and corners. Seamed aluminum gutters eventually fail at the joints because the sealant breaks down under UV exposure. We see this constantly on homes in the San Fernando Valley where summer temps push 110°F and the metal expands and contracts daily.
• Water stains on the siding or foundation below the gutter line. The gutter is either overflowing, leaking, or draining into the wall instead of away from it. By the time you see the stain, you’ve already had months of water intrusion.
• Sagging sections that hold standing water. Standing water breeds mosquitoes and adds weight the hangers weren’t designed for. In a hot Los Angeles summer, that pooled water also accelerates corrosion. If you can see a belly in the run from the street, it’s already past the point of adjustment.

Replacement Cost & What’s Included

Let’s talk real dollars, because you should know the price before anyone touches your roof. For a standard single-story Los Angeles home with roughly 120 to 180 linear feet of gutter, a full Tamko-compatible gutter replacement runs $1,850 to $3,200. Add a second story or steep rooflines that need extra safety equipment, and you’re looking at $2,800 to $4,200. Long runs over 200 linear feet on larger homes in neighborhoods like Encino or Sherman Oaks can push toward $4,500.

That price includes tear-off and disposal of the old run, new .032-gauge K-style aluminum gutters, new hangers spaced every 24 inches, new downspouts if yours are failing, sealant at every seam, and a written guarantee on the entire job before the crew leaves. It also includes the flashing work at the drip edge, because a gutter replacement that doesn’t address how water leaves the roof edge is half a job. We give you one number in writing before we start, and that number doesn’t change. Greg Holloway will tell you the price before we touch the roof, that’s the only way we know how to start.

DIY or Call Us?

On the DIY side, there are things you can safely check: walk the perimeter and look for sagging sections, spot-check downspout openings for debris, and note any rust blooms at the seams. Cleaning out leaves and sediment is reasonable weekend work with a ladder, gloves, and a hose. You can also check the screw spacing on your hangers. If they’re more than 30 inches apart, that’s your sagging problem, and no amount of tightening will fix a poorly hung run.

Where DIY goes sideways is anything involving a ladder above the first story, removing sections while standing on the roof edge, or attempting to re-pitch a run that’s been sagging for years. Gutter work looks simple, but a 24-foot extension ladder on uneven Los Angeles soil, plus 10-foot sections of aluminum swinging in the wind, is how people get hurt. We’re insured, we’re on roofs every day, and we bring the right safety gear. If you’re in Los Angeles and want a straight answer on whether your gutters can be salvaged or need to be replaced, call us at (213) 674-2890 and we’ll walk you through what we see.

FAQs

Get a Free Estimate for Tamko Gutter Replacement in Los Angeles

If your gutters are pulling away, leaking at the seams, or dumping water over the front edge every time it rains, don’t wait for the next storm to find out how bad it really is. Call Tilehurst Roofing Los Angeles at (213) 674-2890 and we’ll schedule a time to look at your roofline, measure your runs, and hand you a written price before any work starts. A live person answers the phone around the clock, and the estimate doesn’t cost you a cent. We’re a Kingswell family roofing company, founded in 2000, and every gutter replacement we do comes with a written guarantee and our 365-Day Done Right Promise: if it’s not right, we make it right, for a full year.

Written by Greg Holloway, Owner, Tilehurst Roofing Los Angeles at Tilehurst Roofing Los Angeles, serving Los Angeles and nearby areas.