Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Gutter Replacement: The Los Angeles Owner’s Guide
If you’re looking for IKO gutter replacement in Los Angeles, here’s the straight answer: we stock IKO-compatible gutter systems and components on our trucks, and a full gutter replacement on a typical Los Angeles home runs $1,800 to $4,200 installed, depending on linear footage and whether we’re also replacing downspouts. Most jobs are completed in a single day.
Most homeowners discover they need this work the hard way: a rainy January afternoon, water spilling over the gutter lip, and a dark stain spreading down the stucco. By then, the gutter has been quietly failing for months. The good news is that IKO gutter systems are straightforward to match and replace, and we can usually tell you over the phone whether you’re looking at a section repair or a full run replacement.
Which IKO Models This Applies To
IKO manufactures gutter systems in both 5-inch and 6-inch profiles, with the 5-inch K-style being the most common on Los Angeles homes built between 1980 and 2010. The 6-inch profile shows up more often on larger roof planes in the hills, where a single valley can dump hundreds of gallons during a downpour. If you’re not sure which you have, measure the gutter’s top opening across: 5 inches is the standard residential size, 6 inches is the oversized version you’ll see on homes with steep roof pitches in areas like Mount Washington or Baldwin Hills.
IKO’s gutter line pairs with their shingle systems, but here’s a compatibility gotcha most owners don’t know: the gutters themselves are not shingle-specific. Any properly sized gutter can be installed with any IKO shingle system, whether you have Cambridge, Dynasty, or Nordic on the roof. What matters more is the drip edge. IKO’s architectural shingle lines, particularly Dynasty and Nordic, have a thicker profile that can crowd a standard drip edge, so we install a slightly extended drip edge on those homes to keep water moving cleanly into the gutter rather than behind it. We’re an independent service provider, not affiliated with IKO, so our recommendations are based on what works on Los Angeles roofs, not what a manufacturer wants us to push.
Styles & brands we work with






Signs Your IKO Gutter Replacement Is Failing
- Water spilling over the lip during light rain. This usually means the gutter pitch has flattened over time, or the downspout is clogged where the elbow meets the wall. Both are repairable, but if the gutter has pulled away from the fascia, replacement is often cheaper than re-hanging.
- Rust staining on the gutter’s exterior face. IKO steel gutters last long in Los Angeles, but the marine layer in areas like Playa del Rey and Westchester accelerates corrosion along the bottom seam. Once rust shows through, pinholes are never far behind.
- Gutters pulling away from the fascia board. This is almost always a fastener failure. In the San Fernando Valley, the summer heat cycles bake the wood behind the gutter, and the screws lose their bite. A sagging gutter can’t be shimmed back to health; it needs to come down and be re-hung properly.
- Water running behind the gutter instead of into it. That’s a drip edge failure, and it’s the most misdiagnosed gutter problem in Los Angeles. The water bypasses the gutter entirely and rots the fascia from behind. When we see this on IKO architectural shingle homes, we replace the drip edge at the same time as the gutter.
- Seams separating at the corners or end caps. Sectional gutters fail at the seams first. If your IKO gutters are separating at the corners, the gaskets are dead and no amount of sealant will make them watertight again. Seamless replacement solves this permanently.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For IKO gutter replacement in Los Angeles, here are the numbers we quote daily:
- Standard 5-inch seamless aluminum, 120 – 160 linear feet: $1,800 – $2,600 installed
- 6-inch seamless aluminum, 120 – 160 linear feet: $2,400 – $3,400 installed
- Downspout replacement, per 10-foot run: $180 – $320
- Drip edge replacement, per linear foot: $6 – $10 installed
The spread comes from two things: accessibility and linear footage. A two-story home in Silver Lake with a steep roof pitch costs more than a single-story ranch in Torrance, because the crew needs different ladder setups and more time. Metal prices also fluctuate, but we lock the price when we write the quote, not when we show up.
Every IKO gutter replacement from Tilehurst Roofing Los Angeles includes removal and haul-away of the old gutters, new seamless gutters cut on-site, new hangers, new downspouts where needed, and a written guarantee delivered before the crew leaves. The price we quote is the price you pay. That’s not a promotion; it’s how we work.
DIY or Call Us?
Gutter work is one of the few roofing-adjacent jobs where a careful homeowner can do some meaningful diagnosis. You can safely check whether your downspouts are clogged, whether water is spilling over versus running behind, and whether the gutters are visibly pulling away from the house. A garden hose on a dry day tells you a lot.
What goes wrong with DIY gutter replacement is the ladder. Reaching a second-story gutter line means working at 18 to 24 feet with tools in your hands, often on uneven Los Angeles hillside terrain. Falls from ladders send more homeowners to the ER than any other home improvement accident, and gutter work is the number one ladder injury job. The actual materials are affordable; the risk is not. If your gutters are on the second story or the ground is sloped, call us at (213) 674-2890. Tell you the price before we touch the roof, that’s the only way we know how to start.
FAQs
On a well-maintained home with clean downspouts and proper drip edge, IKO steel gutters typically last 15 to 20 years in Los Angeles before the seams or end caps fail. Homes within five miles of the coast in places like Venice or San Pedro may see 10 to 15 years because the salt air accelerates corrosion. Call (213) 674-2890 and we’ll give you an honest assessment of what’s left in yours.
Yes, if the damage is isolated to one section and the remaining gutter is sound, we can cut out the bad length and splice in new seamless material. The repaired section won’t be invisible, but it will be watertight and included under our written guarantee. For older IKO gutters with failing seams at multiple points, we’ll tell you straight: section repairs will nickel-and-dime you, and full replacement usually costs less over three years.
A standard single-story home in Los Angeles is done in one day, including removal, haul-away, and new gutter installation. Two-story homes or jobs with multiple downspout runs may take a day and a half. You’ll know the timeline before we start, and it’s part of the written quote.
We carry standard IKO-compatible 5-inch and 6-inch gutter profiles, hangers, downspout elbows, and end caps on every truck, so most replacements are same-visit repairs. If you need a specific color match or a custom length, we order it and schedule the install as soon as it arrives, usually within a few days. We also stock compatible parts for GAF, Owens Corning, and CertainTeed systems, so if your roofline has mixed materials, we can still handle the full job.
Written by Greg Holloway, Owner, Tilehurst Roofing Los Angeles at Tilehurst Roofing Los Angeles, serving Los Angeles and nearby areas.